10.POSITIONING THE DOOR HANDLE
Align the holes in the Left Door (37) with the holes in the Handle (41). Insert Hexagon Bolt (C)
through the Gasket (D), Left Door (37) and Door Handle Base (42) to Door Handle (41). Use
the wrench to tighten. Repeat the former step to assemble the Right Door (45).
11.POSITIONING THE DOOR
1.Take the Right Door (45) with handle assembled. First insert the Bottom Pivot (36) into the
small hole on Platform (49).Then pull down the Right Door Upper Pivot (38) until the upper
end is aligned with top edge of the door. Then align the Right Door Upper Pivot (38) with the
upper hole and pull up the pivot to secure the door.
2.Repeat Step 1 to secure the Left Door (37). Make a proper adjustment until the doors can
be firmly closed.
To Next Page
Loading...
