Z-Wave ZXT-600 - Other Setup Options via Configuration; Learn IR code (Parameter 25); Check IR Code Learning Status (Read Only); Set IR Code number from built-in code library

14
Other Setup Options through Conguration
Functions
Parameter
Number
Parameter Value
Size
( bytes)
Learn IR code 25 (0x19)
Default: 0x0000
range: (0x0000 to 0x20)
refer to learning mapping table
2
Check IR Code
Learning
Status
(Read Only)
26(0x1A)
Default: 0x00
range: 0 to 4 (0x00 to 0x04)
0(0x00) : Idle - IR Channel is idle
1(0x01) : OK - the last learning opera-
tion was completed successfully
2(0x02) : Learning - ZXT-600 is busy
processing previous learning request
3(0x03) : Full – All locations are being
used.
4(0x04) : The last learning request
was failed
Note:The status value 0x01 and 0x04
will be reset to 0x00 after ZXT-600
receives a get command to this pa-
rameter.
1
Set IR Code
number from
built-in
code library
27 (0x1B) Refer to Code Finder Webpage. 2