19
Mounting Location Tips
The ZXT-600 should be mounted on an inner wall about 5ft (1.5m)
above the oor where it is readily aected by changes of the general
room temperature with freely circulating air.
Before mounting, check the material and structure of the mounting
location. If the location does not have the proper material or struc-
ture, the ZXT-600 can fall and cause an injury.
Avoid mounting above or near hot surfaces or equipment (e.g. TV,
Heater, Refrigerator). Avoid mounting where it will be exposed to
direct sunshine, drafts, or in a laundry room or other enclosed space.
Better to mount your device where it has no any obstacle or blocked
object between the device and your AC Appliance.
Mounting the ZXT-600
• Position ZXT-600 on wall, level and mark hole positions with pen-
cil.
• Drill holes at marked positions, then tap in supplied wall anchors.
• Insert and tighten mounting screws as below gure
To Next Page