Z-Wave ZXT-600 - Calibrate temperature reading; Set Auto Report Condition by Room Temperature change; Set Auto Report Condition by Time Interval

16
Calibrate
temperature
reading
37 (0x25)
Temperature oset value.
0(0x00) = 0°C (Default)
1(0x01) = 1°C
2(0x02) = 2°C
3(0x03) = 3°C
4(0x04) = 4°C
5(0x05) = 5°C
255(0xFF) = -1°C
254(0xFE) = -2°C
253(0xFD) = -3°C
252(0xFC) = -4°C
251(0xFB) = -5°C
1
Set Auto
Report
Condition
Trigger
By Room
Temperature
change
30 (0x1E)
0(0x00) = Disable AUTO report func-
tion (Default)
(for saving battery life)
Auto report if room temperature is
dierent from last report.
1(0x01) = 1°F (0.5°C)
2(0x02) = 2°F (1°C)
3(0x03) = 3°F (1.5°C)
4(0x04) = 4°F (2°C)
5(0x05) = 5°F (2.5°C)
6(0x06) = 6°F (3°C)
7(0x07) = 7°F (3.5°C)
8(0x08) = 8°F (4°C)
1
Set Auto
Report
Condition
By
Time Interval
34 (0x22)
0(0x00) = Disable AUTO report func-
tion
Auto report by the following time
interval.
1(0x01) = 1 Hr
2(0x02) = 2 Hrs
3(0x03) = 3 Hrs
4(0x04) = 4 Hrs
5(0x05) = 5 Hrs
6(0x06) = 6 Hrs
7(0x07) = 7 Hrs
8(0x08) = 8 Hrs (Default)
1