DISCONNECTING YOUR KEYBOARD
Your Rugged Messenger features a case that protects your device even
when it's not connected to your keyboard. When you'd like to use the
case without the keyboard, there are three ways you can switch to your
onscreen keyboard:
I. Press the Keyboard Hide/Show button. Pressing this button will
disengage the Rugged Messenger keyboard and allow you to use
your device's on-screen keyboard. Press the Keyboard Hide/Show
button again when you are ready to use your Rugged Messenger's
keyboard.
2. Turn off the Bluetooth@ connection from your device.
3. Turn your Rugged Messenger keyboard off.
PAIRING YOUR ZAGG Rugged Messenger
Your Rugged Messenger can pair with up to three Apple, Android, or Windows
devices at once. Pairing your Rugged Messenger is easy; just follow these
instructions:
1. Ensure your device's Bluetooth connection is on.
2. Press your Rugged Messenger's * 1or *2 keys for three seconds.
The key being used will light and begin pulsing, indicating your
Rugged Messenger is in pairing mode.
3. Your device will display "ZAGG Rugged Messenger" as an available
pairing option. Select it and complete any other pairing steps based on
your device.
4. Repeat steps 2-3 to pair your Rugged Messenger with up to two more
devices. When paired with one or more other devices, simply press
* 1 or $2 to toggle between them.
5. Once paired, the Bluetooth key will stop pulsing and fade to off. Once
begun, if the Rugged Messenger doesn't complete pairing after 60
seconds, it will abort the process. If this happens, repeat steps two
and three.
3
To Next Page
Loading...
