1
WWW.ZALMAN.COM
The cooler’s installation requires an
unobstructed space of 120mm(width),
120mm(length), and 60mm(height), with the
CPU as a central reference point.
Please check if components such as ODDs
and PSU protrude into the required space.
Model
Spec.
CNPS8900 Extreme CNPS8900 Quiet
Material
Pure Copper and Aluminum
Weight
400g
Dimensions
120(L) X 120(W) X 60 (H)mm
FAN
Bearing-Type
2 Ball-Bearing Long Life Bearing
RPM
1,250 ~ 2,800 RPM ±10% 1,000 ~ 1,500 RPM ±10%
Noise Level
19.5~35 dBA ±10% 19~25 dBA ±10%
Input Voltage 12V
1. Precautions
2.
Specications
3.
Installation Requirements
1) Avoid inserting objects or hands into the fan while it is in operation to prevent
product damage and injuries.
2) Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If
contact is made with skin, wash off with water. If ingested or irritation persists,
seek medical attention.
3) To prevent possible injuries, gloves must be worn while handling this product.
4) Excessive force exerted on the fan may cause damage to the fan and/or
system.
5) Use and keep product away from reach of children.
6) Check the components list and condition of the product before installation. If
any problem is found, contact the retailer to obtain a replacement.
7) During transportation of the system, the cooler must be removed. Zalman is
not responsible for any damages that occur during the transport of a system.
8) Productdesignandspecicationsmayberevisedtoimprovequalityand
performance.
1)
Space Requirements
60 mm
120 mm
120 mm
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to
external causes, including but not limited to, improper use, problems
with electrical power, accident, neglect, alteration, repair, improper
installation, or improper testing.
To Next Page
Loading...
Need help?
General
