Zanotti FZ007 - Model Overview and Technical Features; Model Overview; Technical Features by Model; Installation Components List

24
3. Models available
FZ007 FZ008 FZ009
Cooling-cycle through 12V DC electric motor driven compressor, supplied by the vehicle battery
The set temperature is maintained automatically.
3.1 Main technical features:
FZ007
Cooling capacity T amb. 30 °C T box 0 °C 2000 W
Condenser fan helicoidal type 12 Vdc direct supply
Evaporator fan helicoidal type 12 Vdc direct supply
Evaporator air flow 630 m3/h
FZ008
Cooling capacity T amb. 30 °C T box 0 °C 2215 W
Cooling capacity T amb. 30 °C T box -20 °C 1088 W
Condenser fan helicoidal type 12 Vdc direct supply
Evaporator fan helicoidal type 12 Vdc direct supply
Evaporator air flow 840 m3/h
FZ009
Cooling capacity T amb. 30 °C T box 0 °C 3217 W
T amb. 30 °C T box -20 °C 1850 W
Condenser Type A
Cooling capacity T amb. 30 °C T box 0 °C 3271 W
T amb. 30 °C T box -20 °C 1887 W
Condenser Type B
Evaporator fan Radial type 12 Vdc direct supply
Evaporator air flow 840 m3/h
4 Installation instructions
For correct installation carry out a component check, see list of accessories. Then proceed following the
instructions below.
Components
- Evaporator
- Installation Kit
- Electrical main connection Kit
- Electrical road connection Kit
- Condenser – radiator (small – wide , ventilato)
- Support for road compressor Kit
- Road Compressor