How to solve temperature malfunction of the Zanussi Dishwasher? The display shows i61 or i69.
If your Zanussi Dishwasher displays i61 or i69, indicating that the temperature of the water inside the appliance is too high or a malfunction of the temperature sensor occurred, make sure that the temperature of the inlet water does not exceed 60°C. If the issue persists, switch the appliance off and on.
What to do if my Zanussi Dishwasher shows iF1 because the level of water inside the appliance is too high?
If your Zanussi Dishwasher displays iF1 because the level of water inside the appliance is too high, switch the appliance off and on. Also, make sure that the filters are clean and that the outlet hose is installed at the right height above the floor. Refer to the installation instructions.
Why does my Zanussi ZANZDLN6531 Dishwasher have whitish streaks or bluish layers on glasses and dishes?
If there are whitish streaks or bluish layers on glasses and dishes from your Zanussi Dishwasher, the released quantity of rinse aid may be too high, so adjust the rinse aid dosage to a lower level. Alternatively, the quantity of detergent may be too high.
What causes stains and dry water drops on glasses and dishes in my Zanussi ZANZDLN6531 Dishwasher?
If there are stains and dry water drops on glasses and dishes from your Zanussi Dishwasher, the released quantity of rinse aid may not be sufficient. Adjust the rinse aid dosage to a higher level, or the quality of the rinse aid can be the cause.
What to do if my Zanussi ZANZDLN6531 is not draining water and the display shows i20?
If your Zanussi dishwasher is not draining water and the display shows i20, check that the sink spigot and the interior filter system are not clogged. Also, make sure that the drain hose has no kinks or bends.
How to activate Zanussi ZANZDLN6531 Dishwasher?
If your Zanussi Dishwasher won't activate, ensure that the mains plug is properly connected to the mains socket. Also, check your fuse box to make sure there are no damaged fuses.
Why is there a small leak from the Zanussi Dishwasher door?
If you notice a small leak from your Zanussi Dishwasher door, the appliance might not be levelled. Try loosening or tightening the adjustable feet. If applicable, adjust the rear foot if the door is not centered on the tub.
What to do if my Zanussi ZANZDLN6531 Dishwasher doesn't drain water and shows i20?
If your Zanussi Dishwasher isn't draining water and the display shows i20, make sure that the sink spigot is not clogged. Also, check that the interior filter system is not clogged and that the drain hose has no kinks or bends.
What to do if my Zanussi Dishwasher doesn't fill with water and the display shows i10 or i11?
If your Zanussi Dishwasher isn't filling with water and the display shows i10 or i11, ensure the water tap is open and that the water supply pressure isn't too low. Also, check that the water tap and the filter in the inlet hose are not clogged, and that the inlet hose has no kinks or bends.
Why won't my Zanussi Dishwasher drain water? The display shows i20.
If your Zanussi Dishwasher isn't draining and the display shows i20, ensure that the sink spigot and the interior filter system are not clogged. Also, check that the drain hose has no kinks or bends.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Number of Place Settings | 13 |
| Noise Level | 46 dB |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Control panel colour | Black |
| Noise emission class | C |
| Number of washing programs | 6 |
| Half Load Option | Yes |
| Programs | Eco, Glass, Intensive, Normal, Quick |
| Delay Start | Yes |
To Next Page
