What to do if my Zanussi Dishwasher won't start?
If the programme on your Zanussi Dishwasher doesn't start, make sure that the appliance door is closed properly. If the delay start is set, either cancel the setting or wait for the countdown to finish. Also, the appliance may be recharging the resin inside the water softener, which takes approximately 5 minutes.
How to fix Zanussi ZANZDLN6531 not filling with water? The display shows i10 or i11.
If your Zanussi Dishwasher isn't filling with water and the display shows i10 or i11, make sure that the water tap is open and that the water supply pressure is adequate. Also, check that the water tap and the filter in the inlet hose are not clogged, and ensure that the inlet hose has no kinks or bends.
Why does my Zanussi Dishwasher programme last too long?
If your Zanussi Dishwasher programme lasts too long, check if the delay start option is set and cancel the delay setting or wait for the end of the countdown. Also, activating options can increase the programme duration.
Why does my Zanussi Dishwasher have traces of rust on cutlery?
If there are traces of rust on the cutlery in your Zanussi Dishwasher, it could be due to too much salt in the water used for washing. Also, avoid placing silver and stainless steel cutlery together.
Why is my Zanussi ZANZDLN6531 Dishwasher not filling with water and showing i10 or i11?
If your Zanussi Dishwasher is not filling with water and the display shows i10 or i11, make sure the water tap is fully open and not clogged. Check that the water supply pressure is adequate by contacting your local water authority. Also, inspect the inlet hose for any kinks or bends and ensure the filter in the inlet hose is not clogged.
What to do if my Zanussi ZANZDLN6531 Dishwasher has limescale deposits?
If you notice limescale deposits on the tableware, tub, or inside the door of your Zanussi dishwasher, check the salt level and refill if the indicator is on. Ensure the salt container cap is tight. If you have hard tap water, refer to 'The water softener' section. Use salt and set water softener regeneration even with multi-functional tablets. You can also start the Machine Care programme with a descaler designed for dishwashers. If the issue persists, try cleaning the appliance with suitable detergents or consider trying a different detergent, and contact the detergent manufacturer.
What to do if my Zanussi Dishwasher has poor drying results?
If your Zanussi Dishwasher is producing poor drying results, try activating the AirDry function to automatically open the door. Ensure that there is enough rinse aid, and if not, fill the rinse aid dispenser or increase the dosage. Consider that the quality of the rinse aid can affect drying. Always use rinse aid, even with multi-tablets. Note that plastic items may require towel drying. Finally, verify that the selected programme includes a drying phase.
Why does my Zanussi ZANZDLN6531 door open during the wash cycle?
The door of your Zanussi Dishwasher may be opening during the wash cycle because the AirDry function is activated. You can deactivate this function; refer to 'Basic settings'.
What to do if my Zanussi ZANZDLN6531 has dull tableware?
If your Zanussi Dishwasher is causing dull, discoloured, or chipped tableware, ensure that only dishwasher-safe items are being washed. Load and unload the basket carefully, referring to the basket loading leaflet. Place delicate items in the upper basket. You can also activate the Glass Care option for extra protection of glassware and delicate items.
What to do if my Zanussi Dishwasher has residues of detergent in the dispenser?
If there are residues of detergent in the dispenser of your Zanussi Dishwasher at the end of the programme, the detergent tablet may have been stuck and not washed away. Make sure the spray arms are not blocked or clogged, preventing water from reaching the dispenser. Also, ensure that items in the baskets do not impede the detergent dispenser lid from opening.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Number of Place Settings | 13 |
| Noise Level | 46 dB |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Control panel colour | Black |
| Noise emission class | C |
| Number of washing programs | 6 |
| Half Load Option | Yes |
| Programs | Eco, Glass, Intensive, Normal, Quick |
| Delay Start | Yes |
To Next Page
