What to do if my Zanussi ZCAN38EW1 does not operate?
If your Zanussi Freezer isn't operating, first ensure the appliance is switched on and properly plugged into a working mains socket. If the socket has no voltage, try a different socket or contact a qualified electrician.
How to prevent too much frost and ice in my Zanussi Freezer?
If there's too much frost and ice in your Zanussi Freezer, make sure the lid is closing properly and that the gaskets are clean and undamaged. Also, verify that the temperature is set correctly.
How to reduce noise from my Zanussi ZCAN38EW1 Freezer?
If your Zanussi Freezer is making excessive noise, ensure that it is standing stable. Also, check whether the appliance is touching the wall or other objects and, if so, slightly move the appliance.
What does it mean when the temperature indicator flashes on my Zanussi ZCAN38EW1?
If the temperature indicator on your Zanussi Freezer flashes from left to right, this indicates a temperature sensor error. Contact the Authorised Service Center.
How to fix the lamp in my Zanussi Freezer if it does not work?
If the lamp in your Zanussi Freezer isn't working, the lamp is defective. Contact the Authorised Service Center to replace the LED light.
Why is the compressor in my Zanussi Freezer running constantly?
If the compressor in your Zanussi Freezer is running constantly, it could be due to several reasons. Check if the temperature is set correctly. If you've just added a large amount of food, wait a few hours and check again. Ensure the room temperature isn't too high, referring to the climate class chart. Let warm food cool before storing it. Make sure the lid is closed properly and the SUPER function is off.
Why is the temperature in my Zanussi Freezer too low or too high?
If the temperature in your Zanussi Freezer is too low or too high, adjust the temperature regulator to a higher or lower setting as needed. Also, check that the lid is closing properly and that the gaskets are clean and undamaged. Ensure that the temperature of the products you are placing inside is not too high.
What to do if the lid of my Zanussi ZCAN38EW1 Freezer does not close completely?
If the lid of your Zanussi Freezer won't close completely, make sure that food packages are not blocking it. Arrange the packages so that the lid can close properly.
Why is the lid of my Zanussi ZCAN38EW1 Freezer difficult to open?
If the lid of your Zanussi Freezer is hard to open, try cleaning the lid gasket, as it may be dirty or sticky.
Why doesn't the compressor in my Zanussi Freezer start immediately?
This is normal. The compressor starts after a period of time.
General| Type | Upright Freezer |
|---|---|
| Height | 85 cm |
| Colour | White |
| Climate Class | SN-T |
| Number of Shelves | 3 |
| Defrost System | Manual |
To Next Page
