Why is there too much frost and ice in my Zanussi ZCAN15EW1 Freezer?
Excessive frost and ice buildup in your Zanussi Freezer can occur if the lid isn't closing properly or the gasket is damaged or dirty. Also, check if the temperature is set incorrectly.
Why is my Zanussi ZCAN15EW1 Freezer so noisy?
Your Zanussi Freezer might be noisy if it's not standing stable or if it's touching the wall or other objects. Make sure the appliance stands stable and slightly move the appliance.
What to do if my Zanussi Freezer is not working?
If your Zanussi Freezer isn't working, here are a few things to check: * Make sure the appliance is switched on. * Verify that the mains plug is correctly connected to the socket. * Ensure there is voltage in the mains socket by trying a different socket or contacting an electrician.
Why is the temperature in my Zanussi ZCAN15EW1 Freezer too low or too high?
If the temperature in your Zanussi Freezer is not optimal, it could be due to: * Incorrect temperature regulator settings; adjust to a higher or lower setting. * The lid not closing properly; ensure it's sealed and the gaskets are clean. * The temperature of the stored products being too high; allow food to cool before storing.
What does it mean if the temperature indicator flashes from left to right on my Zanussi Freezer?
If the temperature indicator on your Zanussi Freezer flashes from left to right, it indicates a temperature sensor error.
Why is my Zanussi ZCAN15EW1 compressor always running?
The compressor in your Zanussi Freezer might be running constantly due to several reasons: * The temperature setting may be incorrect. * A large amount of food was recently added for freezing; give the freezer a few hours to adjust. * The room temperature could be too high; check the climate class chart. * Warm food was placed inside; always let food cool down before storing it. * The lid isn't closing correctly; make sure it's properly sealed and the gaskets are clean and undamaged. * The SUPER function may be activated.
What to do if the lid does not close completely on my Zanussi ZCAN15EW1?
If the lid of your Zanussi Freezer doesn't close completely, it's likely that food packages are blocking it. Try rearranging the packages to allow the lid to close properly.
Why is the lid difficult to open on my Zanussi Freezer?
If the lid on your Zanussi Freezer is hard to open, the lid gasket might be dirty or sticky. Try cleaning the lid gasket.
Why Zanussi ZCAN15EW1 compressor doesn't start immediately?
The compressor in your Zanussi Freezer not starting immediately after pressing the SUPER button or changing the temperature is normal. The compressor will start after a period of time.
General| Category | Freezer |
|---|---|
| Type | Chest Freezer |
| Model | ZCAN15EW1 |
| Energy Efficiency Class | F |
| Colour | White |
| Noise level dB(A) | 40 dB(A) |
| Defrosting System | Manual |
| Noise Level | 40 dB(A) |
| Climate class | SN, N, ST, T |
| Width (mm) | 600 mm |
To Next Page
