EasyManua.ls Logo

Zanussi ZDE47200W - Programme Functions, Maintenance, and Operation; Additional Functions and Programme Control; Cleaning and Maintenance Procedures

Zanussi ZDE47200W
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31 2
5
64
Selecting additional functions
You can choose from the additional functions:
button 1 - DELICATE
button 2 - TEXTILE
DELICATE
gentle drying with reduced heat of sensitive fabrics and
temperature-sensitive textiles (e.g. acrylic, viscose)
marked on care label with:
TEXTILE
Press the Textile button repeatedly, to select the desired
option. The relevant light will light up. You can select 2
different options: COTTON cycle: to be used for cotton,
and SYNTHETICS : to be used for synthetic or delicate
items.
Starting the programme
Press the START PAUSE button. The programme is star-
ted.
The programme phase is shown by appropriate lights;
light 6- DRYING , light 5- ANTICREASE-END .
Changing programme
To change a programme which has been selected by mis-
take once the programme has started, first turn the pro-
gramme selector to OFF position. The programme is
cancelled.
The programme can no longer be changed directly
once the programme has started. If nevertheless
there is an attempt to change the programme on the pro-
gramme knob or if an function button (excluding the BUZ-
ZER button
1)
) is pressed, led on the START/PAUSE button
starts flashing temporarily in red. The drying programme
is not however affected by this (laundry protection).
Drying cycle complete / removing laundry
Once the drying cycle is complete, the lights ANTI-
CREASE-END and light 4- FILTER are on. If the buzzer is
active, an acoustic signal sounds intermittently for about
one minute.
The drying cycles are automatically followed by an
anti-crease phase which lasts around 30 minutes.
The drum rotates at intervals during this phase. This
keeps the laundry loose and free of creases. The laundry
can be removed at any time during the anti-crease phase.
(The laundry should be taken out towards the end of the
anti-crease phase at the latest to prevent creases from
forming.)
1. Open door.
2. Clean the filter.
3. Remove laundry.
4. Turn the programme selector to "O" - OFF .
Important! Clean the filter after each drying cycle.
5. Close the door.
Cleaning and maintenance
Warning! The tumble dryer is not to be used if
industrial chemicals have been used for cleaning!
Warning! You must DISCONNECT the appliance
from the electricity supply, before you can carry out
any cleaning or maintenance work.
Cleaning fluff filter
The filter collect all the fluff which accumulates during
drying. To ensure that the dryer works perfectly, the fluff
filter must be cleaned after every drying cycle.
The warning light FILTER , is on to remind you this opera-
tion.
Caution! Never operate the dryer without fluff filter
or with damaged or blocked fluff filter.
1) Only dryers with buzzer button
8
www.zanussi.com

Related product manuals