What to do if my Zanussi Dishwasher does not drain water?
If your Zanussi Dishwasher isn't draining water, check these items: * Make sure the sink spigot is not clogged. * Make sure the drain hose has no kinks or bends.
What to do if my Zanussi Dishwasher doesn't fill with water?
If your Zanussi Dishwasher isn't filling with water, check the following: * Ensure the water tap is fully open. * Verify that the water supply pressure isn't too low. Contact your local water authority for information. * Confirm the water tap isn't clogged. * Check that the filter in the inlet hose isn't clogged. * Ensure the inlet hose has no kinks or bends.
What to do if my Zanussi Dishwasher won't drain the water?
If your Zanussi Dishwasher isn't draining water, check if the sink spigot is clogged. If the end indicator flashes twice intermittently or continuously, this could be the reason. Also, make sure the drain hose isn't kinked or bent, which could obstruct water flow.
How to fix small leak from the Zanussi Dishwasher door?
If you notice a small leak from your Zanussi Dishwasher door, it could be due to the appliance not being level. Try loosening or tightening the adjustable feet to level it. Also, the door might not be centered on the tub; adjust the rear foot to correct this.
What to do if my Zanussi Dishwasher won't start?
If your Zanussi Dishwasher programme isn't starting, make sure the appliance door is properly closed. Press the start button. If a delay start is set, either cancel it or wait for the countdown to complete. Also, the appliance may be undergoing a procedure to recharge the resin inside the water softener, which takes about 5 minutes.
General| Brand | Zanussi |
|---|---|
| Model | ZDF22002XA |
| Category | Dishwasher |
| Language | English |
To Next Page
