What to do if my Zanussi ZDF26011WA won't start?
If your Zanussi Dishwasher program won't start, ensure the appliance door is fully closed. If the delay start function is active, either cancel the setting or wait for the countdown to finish. The appliance may also be undergoing a resin recharge, which takes about 5 minutes.
What to do if my Zanussi Dishwasher won't turn on?
If your Zanussi Dishwasher won't activate, ensure the mains plug is correctly connected to the mains socket and check that there is no damaged fuse in the fuse box.
What to do if my Zanussi Dishwasher is not draining water?
If your Zanussi Dishwasher isn't draining water, check the following: 1. Make sure the sink spigot is not clogged. 2. Ensure the filter in the outlet hose isn't clogged. 3. Verify the interior filter system is clear. 4. Confirm the drain hose has no kinks or bends.
What to do if my Zanussi Dishwasher is not filling with water?
If your Zanussi Dishwasher isn't filling with water, make sure the water tap is fully open and that the water supply pressure isn't too low. Also, check that the water tap isn't clogged, the filter in the inlet hose isn't clogged, and the inlet hose has no kinks or bends.
What does it mean if my Zanussi ZDF26011WA Dishwasher stops and starts frequently?
It is normal for your Zanussi Dishwasher to stop and start during operation. This provides optimal cleaning results and energy savings.
What causes a small leak from the Zanussi ZDF26011WA Dishwasher door?
A small leak from your Zanussi Dishwasher door can be caused by the appliance not being level. Adjust the adjustable feet to correct this. Also, ensure the appliance door is centered on the tub by adjusting the rear foot.
What to do if the anti-flood device is on in my Zanussi Dishwasher?
If the anti-flood device is activated on your Zanussi Dishwasher, close the water tap and contact an Authorised Service Centre.
Why does my Zanussi ZDF26011WA trip the circuit breaker?
Your Zanussi Dishwasher might trip the circuit breaker if the amperage is insufficient to power all appliances in use simultaneously. Check the socket amperage and meter capacity, or turn off another appliance. If this doesn't resolve the issue, there may be an internal electrical fault, and you should contact an Authorised Service Centre.
What to do if my Zanussi ZDF26011WA door is hard to close?
If your Zanussi Dishwasher door is difficult to close, ensure the appliance is level by adjusting the feet. Also, check that no tableware parts are protruding from the baskets.
Why does the remaining time increase on my Zanussi ZDF26011WA?
The increase in remaining time on your Zanussi Dishwasher display is not a defect; the appliance is working correctly.
General| Door color | White |
|---|---|
| Control type | Buttons |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Cycle time | 195 min |
| Noise level | 47 dB |
| Delay start (max) | 24 h |
| Dishwashing programs | Auto 45-70°C, Bio, Eco, Intensive, Quick |
| Number of place settings | 13 place settings |
| Number of washing programs | 5 |
| Number of temperature settings | 4 |
| Drying class | A |
| Annual water consumption | 2775 L |
| Annual energy consumption | 262 kWh |
| Connected load | 2200 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.1 W |
| Water consumption per cycle | 9.9 L |
| Energy consumption per cycle | 0.932 kWh |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
Safety advice for children and vulnerable individuals.
General safety precautions for appliance use.
Instructions for installing the appliance.
Guidelines for safe electrical connection.
Instructions for connecting to the water supply.
Safe usage practices for the dishwasher.
Information on contacting service for repairs.
Explanation of indicator lights on the control panel.
How to select a washing programme.
How to reset the appliance or cancel a programme.
How to access and modify user settings.
Table showing water hardness levels and corresponding softener settings.
Step-by-step guide to adjust water softener settings.
How to turn off the rinse aid refill alert.
Initial steps before using the dishwasher for the first time.
Instructions for filling the salt container.
Basic steps for operating the dishwasher daily.
Instructions for adding detergent, rinse aid, and multi-tablets.
Explanation of the auto power-off feature.
Steps to start a washing programme.
How to activate the XtraDry option for better drying.
How to set a delayed start for a programme.
What happens if the door is opened during operation.
Actions to take when a programme finishes.
General advice for optimal cleaning and environmental protection.
Detailed explanation of water softener function and adjustment.
Guidelines for using salt, rinse aid, detergent, and multi-tablets.
Instructions for loading baskets and pre-start checks.
How to safely unload the dishwasher baskets.
Instructions for cleaning the appliance filters.
How to clean the dishwasher spray arms.
Guidance for cleaning the exterior and interior of the appliance.
Table of common problems, alarm codes, and their solutions.
Solutions for poor washing and drying performance.
Specifications for appliance dimensions and electrical connection.
Details on water supply requirements and appliance capacity.
Details on energy consumption in different modes.
Location and information on the appliance rating plate.
Contact details for test performance information.
Information on recycling and proper disposal of materials.
To Next Page