Zanussi ZFC26400 User Manual (English)

Questions and Answers:

J
Jordan WilsonAug 21, 2025
Why is there too much frost and ice in my Zanussi ZFC26400?
- B
  Brittany MarshallAug 21, 2025
  If you find excessive frost and ice in your Zanussi Freezer, it could be due to a few reasons. The lid might not be closing correctly, or the gasket could be deformed or dirty; refer to "Closing the door" for guidance. Also, check that the water drainage plug is correctly positioned. Finally, an incorrect temperature setting could be the culprit; refer to the "Operation" chapter.
L
lonnie48Aug 23, 2025
What does it mean if the power indicator light is flashing on my Zanussi Freezer?
- W
  Wendy SotoAug 23, 2025
  If the power indicator light on your Zanussi Freezer is flashing, it suggests that an error has occurred in measuring the temperature or the appliance isn't working properly. It is recommended to contact the nearest Authorized Service Centre.
D
Dale Johnson IIAug 25, 2025
What to do if my Zanussi ZFC26400 Freezer does not operate?
- F
  Frances ChristianAug 25, 2025
  If your Zanussi Freezer isn't working, it could be due to a few reasons. First, ensure that the appliance is switched on. Next, check that the mains plug is correctly connected to the mains socket. Finally, verify that there is voltage in the mains socket by trying a different socket or contacting an electrician.
M
Mary RobinsonAug 26, 2025
Why is the audible or visual alarm on my Zanussi Freezer?
- R
  Richard MillerAug 26, 2025
  An audible or visual alarm on your Zanussi Freezer might be triggered for several reasons: * The freezer was recently switched on, or the internal temperature is too high. * A large amount of food was added for freezing at once; wait a few hours and check the temperature again. * The lid was left open for an extended period; only open the lid when necessary.
R
Richard SimpsonAug 27, 2025
Why is my Zanussi Freezer so noisy?
- M
  Matthew SandersAug 27, 2025
  If your Zanussi Freezer is making excessive noise, check to ensure it is standing stably.
J
Julia CarpenterAug 29, 2025
What to do if the audible or visual alarm is on in my Zanussi ZFC26400 Freezer?
- W
  williamsmichaelAug 29, 2025
  If the audible or visual alarm is activated on your Zanussi Freezer, it could be because the freezer has recently been switched on or the temperature inside is too high. Refer to the "High Temperature Alarm" section. If the problem persists, it is recommended to contact an Authorized Service Centre.
A
allisonclaytonAug 31, 2025
How to adjust the temperature in my Zanussi ZFC26400 if it's too low or high?
- A
  Amanda McmahonAug 31, 2025
  If the temperature in your Zanussi Freezer is too low or too high, the temperature regulator might not be set correctly. Try setting a higher or lower temperature to resolve this issue.
J
Joseph SmithSep 1, 2025
What to do if the products' temperature is too high in Zanussi Freezer?
- V
  vwilliamsSep 1, 2025
  Let the product temperature decrease to room temperature before storage.
H
hrojasSep 3, 2025
What to do if the thickness of the frost is greater than 4-5 mm in Zanussi ZFC26400 Freezer?
- A
  Austin WallaceSep 3, 2025
  Defrost the appliance.
D
David DillonSep 4, 2025
What to do if the door has been opened often on Zanussi ZFC26400?
- E
  Emily HernandezSep 4, 2025
  Open the door only if necessary.