Zanussi ZFC26400 User Manual (English)

Questions and Answers:

K
Kathryn AndersonSep 6, 2025
How to fix too low or too high temperature in Zanussi ZFC26400?
- E
  Ethan FreySep 6, 2025
  If the temperature in your Zanussi Freezer is too low or too high, consider the following: * Adjust the temperature regulator to a higher or lower setting as needed. * Ensure the products' temperature has decreased to room temperature before storage. * Avoid storing too many products simultaneously; store less products at the same time. * Defrost the appliance if the frost thickness exceeds 4-5 mm. * Open the lid only when necessary. * Ensure cold air can circulate by not placing items too close together.
D
Daniel ThomasSep 8, 2025
What to do if the lid of my Zanussi ZFC26400 Freezer doesn't close completely?
- M
  Melanie PetersSep 8, 2025
  If the lid of your Zanussi Freezer isn't closing completely, it might be because food packages are blocking it; arrange them properly according to the sticker inside the appliance. Another reason could be excessive frost buildup; eliminate the excess frost.
W
wbowmanSep 9, 2025
Why does my Zanussi ZFC26400 Freezer compressor operate continually?
- E
  Elizabeth AndersonSep 9, 2025
  If your Zanussi Freezer's compressor runs non-stop, several factors could be at play. The temperature setting might be incorrect, so refer to the "Operation" chapter for guidance. Also, introducing a large quantity of food for freezing at once can cause this; wait a few hours and recheck the temperature. High room temperature could be the reason; check the climate class chart on the rating plate. Ensure that food cools to room temperature before storing it. Finally, verify that the lid is properly closed and the gaskets are clean and undamaged.
A
Allen JohnsonSep 12, 2025
How to troubleshoot a Zanussi Freezer that does not operate?
- H
  hcarneySep 12, 2025
  If your Zanussi Freezer isn't operating, first, ensure that the appliance is switched on. If it is already on, check whether the mains plug is correctly connected to the mains socket, and if not, connect it correctly.
T
Thomas JohnsonSep 12, 2025
What to do if the lid doesn't close completely on my Zanussi ZFC26400?
- T
  Teresa JonesSep 12, 2025
  If the lid of your Zanussi Freezer doesn't close completely, it might be because food packages are blocking it. Try arranging the packages properly, referring to the sticker inside the appliance for guidance. Alternatively, excessive frost could be the issue, so eliminate any excess frost.