Why does the flame extinguish immediately after ignition on my Zanussi ZGO63414BA?
If the Zanussi Hob's flame extinguishes right after ignition, the thermocouple may not be getting enough heat. After you light the flame, hold the knob down for no more than 10 seconds.
What to do if there is no spark when trying to activate the spark generator on Zanussi ZGO63414BA Hob?
If there is no spark when you try to activate the spark generator on your Zanussi Hob, check the following: * Confirm the hob is correctly connected to the electrical supply. * Verify the fuse isn't blown; if it repeatedly blows, contact a qualified electrician. * Ensure the burner cap and crown are correctly placed.
How to fix an uneven flame ring on a Zanussi ZGO63414BA Hob?
An uneven flame ring on your Zanussi Hob is usually caused by a burner crown blocked with food residues. Ensure that the injector is not blocked and the burner crown is clean.
General| Type | Gas Hob |
|---|---|
| Number of Burners | 4 |
| Width | 60 cm |
| Control Type | Knob |
| Ignition Type | Automatic |
| Colour | Black |
| Dimensions (WxD) | 60 x 51 cm |
| Gas Type | Natural Gas |
To Next Page
