Why is my Zanussi ZOB65902XU not heating up?
Your Zanussi oven might not be heating up due to several reasons: * The oven may be deactivated, so you should activate it. * The clock might not be set; in this case, set the clock. * The settings may be incorrect, so ensure they are properly configured. * A blown fuse could also be the cause. Check the fuse, and if it continues to blow, contact a qualified electrician.
What to do if my Zanussi Oven display shows 12:00?
If your Zanussi oven display shows "12.00", it indicates there was a power cut. You should reset the clock.
What to do if water comes out of the cavity embossment in my Zanussi ZOB65902XU?
If water is coming out of the cavity embossment in your Zanussi oven, it means there is too much water in it. Deactivate the oven, ensure it is cold, wipe the water with a cloth or sponge, and add the correct amount of water to the cavity embossment. Refer to the specific procedure for the correct amount.
Why does steam and condensation settle on the food and in the cavity of my Zanussi Oven?
Steam and condensation may settle on the food and in the cavity of your Zanussi oven if you leave the dish in the oven for too long after cooking. To prevent this, do not leave dishes in the oven for longer than 15 - 20 minutes after the cooking process ends.
To Next Page
General
