How to fix a Zanussi ZRG14800WV that does not turn on?
If your Zanussi Refrigerator isn't working, first, ensure the appliance is switched on. Next, check that the mains plug is correctly connected to the mains socket. Finally, test the socket with another appliance; if it still doesn't work, contact a qualified electrician.
What to do if water is flowing into my Zanussi Refrigerator?
If water is flowing into your Zanussi Refrigerator, the water outlet may be clogged, so clean it. Also, ensure that food products are not touching the rear plate, preventing water from flowing into the water collector.
Why is my Zanussi Refrigerator so noisy?
If your Zanussi Refrigerator is making excessive noise, check to ensure the appliance stands stable.
How to fix the lamp in my Zanussi Refrigerator?
If the lamp in your Zanussi Refrigerator isn't working, first, try closing and opening the door to ensure the lamp isn't in stand-by mode. If that doesn't work, you should refer to "Replacing the lamp".
Why is my Zanussi ZRG14800WV leaking water on the floor?
If water is flowing on the floor from your Zanussi Refrigerator, attach the melting water outlet to the evaporative tray above the compressor.
Why is my Zanussi Refrigerator temperature too high/low?
If the temperature in your Zanussi Refrigerator is too low or too high, you can try the following: * Adjust the temperature regulator to a higher or lower setting. * Ensure the door is closed correctly. * Allow warm food to cool before storing it. * Store fewer items at once. * Defrost the appliance if the frost is thicker than 4-5 mm. * Minimize how often you open the door.
How to reduce frost and ice buildup in my Zanussi Refrigerator?
If there is too much frost and ice in your Zanussi Refrigerator, make sure the door is closing properly. Also, check that the water drainage plug is correctly positioned, and ensure all food products are properly wrapped. You may also need to check that the temperature is set correctly.
Why does the Zanussi ZRG14800WV compressor run constantly?
If the compressor in your Zanussi Refrigerator is constantly running, check if the temperature is set correctly. If you've recently added a lot of food to be frozen, wait a few hours and check the temperature again. Also, make sure the room temperature isn't too high by checking the climate class chart on the rating plate, and allow warm food to cool before storing it.
Why is there so much condensation in my Zanussi Refrigerator?
If you notice a lot of condensed water on the rear wall of your Zanussi Refrigerator, it might be because the door is being opened too often or not closed completely. Also, make sure food is wrapped properly before storing it.
Why is water flowing on the rear plate of my Zanussi ZRG14800WV Refrigerator?
If water flows on the rear plate of your Zanussi Refrigerator, this is normal. During the automatic defrosting process, frost melts on the rear plate.
General| Category | Refrigerator |
|---|---|
| Energy Efficiency Class | A+ |
| Cooling System | Static |
| Color | White |
| Number of Door Bins | 3 |
| Defrost System | Manual |
| Net Capacity | 338 L |
| Total Net Capacity | 338 L |
| Height | 178 cm |
| Width | 55 cm |
| Climate Class | SN-N-ST |
| Freezer Star Rating | 4 Star |
To Next Page