What to do if Zanussi ZUAN28FX Freezer does not operate?
If your Zanussi Freezer isn't working, there are a few things to check: First, make sure the appliance is switched on. Next, verify that the mains plug is correctly connected to the mains socket. Finally, test the socket by plugging in another electrical appliance; if it still doesn't work, contact a qualified electrician.
Why is my Zanussi ZUAN28FX compressor always running?
There are several reasons why the compressor in your Zanussi Freezer might be running constantly. It could be due to an incorrect temperature setting. Also, placing too many food products at once, or storing warm food without cooling it first, can cause this issue. The room temperature may also be too high. If the FastFreeze function is enabled, the compressor will run continuously. Refer to "Control Panel" chapter, "Installation" chapter, "Closing the door" section and "FastFreeze function" section for more detailed information.
What to do if there is too much frost and ice in Zanussi Freezer?
Excessive frost and ice in your Zanussi Freezer can be caused by several factors. Ensure the door is closing correctly. Improperly wrapped food products can also contribute to this issue, so wrap them properly. The temperature setting may be incorrect. Also, if the appliance is fully loaded and set to the lowest temperature, or if the ambient temperature is too high, it can cause excessive frost. Refer to "Closing the door" section and "Control Panel" chapter for more detailed information.
Why is there too much frost and ice in my Zanussi ZUAN28FX Freezer?
Excessive frost and ice in your Zanussi freezer can be due to several factors. Ensure the door is closing correctly. Improperly wrapped food products can also contribute. Check if the temperature is set too low, or if the appliance is fully loaded at the lowest temperature. The gasket may be deformed or dirty. Also, a low temperature setting combined with a high ambient temperature can cause this issue. Try wrapping food products better and setting a higher temperature.
Why is the temperature in my Zanussi ZUAN28FX too high or too low?
If the temperature in your Zanussi Freezer is not optimal, consider these possible causes: The temperature may not be set correctly, so adjust it accordingly. Ensure the door is closing properly. Also, placing warm food inside or storing too many items at once can affect the temperature. If the frost thickness exceeds 4-5 mm, defrost the appliance. Opening the door frequently can also impact the temperature. Refer to "Closing the door" section for more information.
What to do if Zanussi ZUAN28FX door does not open easily?
If you're having trouble opening your Zanussi Freezer door, it might be because you're trying to reopen it immediately after closing it. Wait a few seconds before attempting to reopen the door.
What to do if Zanussi ZUAN28FX Freezer is noisy?
If your Zanussi Freezer is making excessive noise, check if the appliance stands stable.
What to do if water flows on the floor from Zanussi Freezer?
If water is leaking from your Zanussi Freezer onto the floor, ensure that the melting water outlet is correctly attached to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray.
What to do if Zanussi ZUAN28FX Freezer door is misaligned?
If the door of your Zanussi Freezer is misaligned or interfering with the ventilation grill, it's likely that the appliance is not levelled correctly. Refer to installation instructions.
Why is the power indicator light flashing on my Zanussi Freezer?
If the power indicator light is flashing on your Zanussi Freezer, it indicates that an error has occurred in measuring the temperature. Contact a qualified electrician or the nearest Authorized Service Centre.
General| Appliance placement | Freestanding |
|---|---|
| Dimensions (H x W x D) | 850 x 550 x 635 mm |
| Weight | 32 kg |
| Door hinge | Right |
| Freezing capacity | 10 kg/24h |
| Height | 85 cm |
| Number of Shelves | 3 |
| Defrost System | Manual |
| Type | Freezer |
| Star rating | 4* |
To Next Page
