Need help?Do you have a question about the Zanussi ZVM64N and is the answer not in the manual?
Crucial safety guidelines to ensure safe operation and prevent hazards during use.
Diagram and description of the ceramic hob's cooking zones and specifications.
Details on control knob assignment, heat settings, and the residual heat indicator function.
Instructions on adjusting heat levels for cooking, including increasing, decreasing, and switching off.
Advice on acrylamides, cookware, energy saving, and examples of cooking applications.
Instructions for daily cleaning, removing deposits, and general care of the appliance.
Guidance for common problems, troubleshooting steps, and contacting customer service.
Instructions for environmentally responsible disposal of packaging and the old appliance.
Critical safety guidelines for installation and details on the physical assembly and fitting of the hob.
Overview of the European guarantee policy, terms, and conditions for the appliance.
Information required for service calls, including model, PNC, serial number, and fault description.
Crucial safety guidelines to ensure safe operation and prevent hazards during use.
Diagram and description of the ceramic hob's cooking zones and specifications.
Details on control knob assignment, heat settings, and the residual heat indicator function.
Instructions on adjusting heat levels for cooking, including increasing, decreasing, and switching off.
Advice on acrylamides, cookware, energy saving, and examples of cooking applications.
Instructions for daily cleaning, removing deposits, and general care of the appliance.
Guidance for common problems, troubleshooting steps, and contacting customer service.
Instructions for environmentally responsible disposal of packaging and the old appliance.
Critical safety guidelines for installation and details on the physical assembly and fitting of the hob.
Overview of the European guarantee policy, terms, and conditions for the appliance.
Information required for service calls, including model, PNC, serial number, and fault description.
This document provides installation and operating instructions for the Zanussi ZVM64N/X ceramic glass hob, a built-in appliance designed for domestic cooking and frying. It emphasizes safety, proper usage, and maintenance to ensure optimal performance and longevity.
The Zanussi ZVM64N/X is a ceramic glass hob equipped with four cooking zones, each with a different power output and diameter, designed to accommodate various cookware sizes and cooking needs. The hob operates by heating the ceramic glass surface, which then transfers heat to the cookware placed on it. Each cooking zone is controlled by a dedicated knob, allowing for precise adjustment of heat settings from 1 (lowest power) to 9 (highest power), with 0 representing the off position.
A key feature of this hob is the residual heat indicator. This indicator illuminates when a cooking zone is hot, even after it has been switched off, serving as a safety warning and also highlighting an energy-saving opportunity. The residual heat can be utilized for tasks such as melting ingredients or keeping food warm, contributing to energy efficiency.
The appliance is designed to be integrated into a kitchen worktop, providing a sleek and modern appearance. Its primary function is to facilitate the cooking process through controlled heating, offering versatility for boiling, searing, simmering, frying, and braising various types of food.
To operate the hob, users select the desired cooking zone and turn its corresponding control knob to set the heat level. For initial heating, such as boiling water or searing food, a high heat setting (e.g., 9) is recommended. Once the desired temperature is reached or the food begins to cook, the heat setting can be reduced to maintain a steady cooking process. The hob's ceramic glass surface ensures even heat distribution to the cookware.
The control knobs allow for intuitive adjustment: turning clockwise increases the heat setting from 1 to 9, while turning anti-clockwise decreases it from 9 to 1. To switch off a cooking zone, the knob is turned to the 0 position.
For optimal cooking results and energy efficiency, it is advised to always place cookware on the cooking zone before switching it on. Using lids on pans whenever possible helps to retain heat and speed up cooking. The size of the cookware should ideally match the size of the cooking zone to maximize heat transfer and prevent energy waste. The residual heat indicator serves as a reminder to utilize the remaining heat for melting or warming, further enhancing energy saving.
The manual includes a table with examples of cooking applications, providing guidance on appropriate heat settings and cooking times for various dishes, from melting butter to deep frying chips. This helps users achieve desired culinary outcomes while promoting efficient use of the appliance.
Regular cleaning and care are essential for maintaining the appearance and functionality of the ceramic glass hob. The appliance should be cleaned after each use to prevent the buildup of food residues. This involves wiping the surface with a damp cloth and a little washing-up liquid, followed by drying with a clean cloth.
For more stubborn deposits, specific methods are recommended:
It is crucial to avoid using sharp objects or abrasive cleaning materials, as these can damage the glass ceramic surface. Similarly, cleaning the appliance with a steam jet or high-pressure cleaning equipment is not permitted for safety reasons. Any residues from cleaning agents must be thoroughly removed with water and washing-up liquid to prevent damage to the appliance.
While scratches or dark stains that cannot be removed may appear on the glass ceramic over time, the manual clarifies that these do not affect the functioning of the appliance.
In case of operational issues, the manual provides a troubleshooting guide to help users identify and remedy common problems, such as cooking zones not functioning or the residual heat indicator not displaying. If problems persist, users are advised to contact the Customer Care Department or an authorized service engineer. Repairs should only be carried out by qualified professionals to prevent potential hazards and ensure the appliance's safety and warranty validity.
General| Type | Gas hob |
|---|---|
| Width | 60 cm |
| Number of cooking zones | 4 |
| Number of burners | 4 |
| Control type | Rotary |
| Material | Stainless steel |
| Ignition type | Automatic |
| Gas type | LPG (G30/G31) |
| Dimensions (WxDxH) | 594 x 510 x 50 mm |
To Next Page
