What to do if my Zanussi ZXAN13FW0 Refrigerator does not operate?
If your Zanussi Refrigerator isn't operating, first, ensure it is switched on. Then, check that the mains plug is correctly connected to the mains socket. Finally, test the socket with another appliance to confirm it has voltage. If not, contact a qualified electrician.
What to do if the lamp in my Zanussi ZXAN13FW0 does not work?
If the lamp in your Zanussi Refrigerator does not work, try closing and opening the door to see if the lamp is in stand-by mode.
Why is there too much condensed water on the rear wall of my Zanussi Refrigerator?
If there is too much condensed water on the rear wall of your Zanussi Refrigerator, it might be because the door was opened too frequently or not closed completely. Also, ensure stored food is wrapped properly before placing it in the refrigerator.
Why is water flowing on the floor from my Zanussi ZXAN13FW0 Refrigerator?
If you notice water flowing on the floor from your Zanussi Refrigerator, it's likely that the melting water outlet is not connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray.
What to do if water flows inside my Zanussi ZXAN13FW0 Refrigerator?
If you find water flowing inside your Zanussi Refrigerator, ensure that food products are not touching the rear plate, as this can prevent water from flowing into the water collector. Additionally, check if the water outlet is clogged and clean it if necessary.
Why is there too much frost and ice in my Zanussi ZXAN13FW0 Refrigerator?
If there is too much frost and ice in your Zanussi Refrigerator, make sure the door is closed correctly. Ensure the food products are wrapped properly. If the appliance is fully loaded and set to the lowest temperature, set a higher temperature. Also, if the ambient temperature is too high, set a higher temperature.
What causes the temperature in my Zanussi ZXAN13FW0 to be too low or too high?
If the temperature in your Zanussi Refrigerator is too low or too high, try setting a higher or lower temperature. Also, make sure the door is closed correctly. Ensure the food products' temperature decreases to room temperature before storage. If many food products are stored at the same time, store fewer food products at the same time. Open the door only if necessary.
Why does water flow on the rear plate of my Zanussi ZXAN13FW0?
If water flows on the rear plate of your Zanussi Refrigerator, it is because, during the automatic defrosting process, frost melts on the rear plate. Dry the water with a soft cloth.
Why does the compressor in my Zanussi Refrigerator operate continually?
If your Zanussi Refrigerator compressor operates continually, the temperature might be set incorrectly. Also, consider if you recently added many food products at once or if the room temperature is too high. Ensure food products have cooled to room temperature before storing them and that the door is closing correctly.
Why does the door of my Zanussi Refrigerator not open easily?
If the door of your Zanussi Refrigerator does not open easily, it might be because you attempted to re-open the door immediately after closing it. Wait a few seconds between closing and re-opening the door.
General| Type | Freestanding |
|---|---|
| Energy Efficiency Class | F |
| Color | White |
| Number of Shelves | 3 |
| Reversible Door | Yes |
| Climate Class | SN-T |
| Noise Level | 39 dB |
| Number of Door Bins | 4 |
| Width | 600 mm |
To Next Page
