What to do if my Zanussi ZXAN9FW0 does not operate?
If your Zanussi Refrigerator isn't operating, first, ensure that the appliance is switched on. Next, check that the mains plug is correctly connected to the mains socket. Finally, test the socket with another electrical appliance to confirm it's working; if not, contact a qualified electrician.
Why is there too much condensed water on the rear wall of my Zanussi ZXAN9FW0?
Too much condensed water on the rear wall of your Zanussi refrigerator can occur if the door is opened too frequently. Try to open the door only when necessary. Also, ensure that the door is closed completely after each use.
Why is water flowing on the floor from my Zanussi ZXAN9FW0 Refrigerator?
If water is flowing on the floor from your Zanussi refrigerator, it's likely that the melting water outlet is not correctly connected to the evaporative tray above the compressor. You should attach the melting water outlet to the evaporative tray.
Why is the temperature in my Zanussi Refrigerator too low/too high?
If the temperature in your Zanussi refrigerator is too low or too high, begin by ensuring that the temperature is set correctly to a higher or lower setting as needed. If that doesn't resolve the issue, let the food products' temperature decrease to room temperature before storage and store less food products at the same time. Also, open the door only if necessary. If the thickness of the frost is greater than 4-5 mm, defrost the appliance.
Why is there too much frost and ice in my Zanussi ZXAN9FW0?
If there is too much frost and ice in your Zanussi refrigerator, ensure food products are properly wrapped. If the appliance is fully loaded and set to the lowest temperature, set a higher temperature. If the temperature set in the appliance is too low and the ambient temperature is too high, set a higher temperature.
What to do if water flows inside my Zanussi ZXAN9FW0 Refrigerator?
If water flows inside your Zanussi refrigerator, ensure that food products do not touch the rear plate, as this can prevent water from flowing into the water collector. Also, check if the water outlet is clogged and clean it if necessary.
Why doesn't the door open easily on my Zanussi ZXAN9FW0?
If the door of your Zanussi refrigerator does not open easily, especially right after closing it, wait a few seconds between closing and re-opening the door.
Why does water flow on the rear plate of the Zanussi ZXAN9FW0 Refrigerator?
If water flows on the rear plate of your Zanussi refrigerator, this is a normal part of the automatic defrosting process where frost melts. You can dry the water with a soft cloth.
General| Energy Rating | F |
|---|---|
| Colour | White |
| Width | 595 mm |
| Depth | 650 mm |
| Climate Class | SN-N-ST-T |
| Number of Shelves | 4 |
| Number of Door Bins | 3 |
| Reversible Door | Yes |
| Type | Freestanding |
| Fridge Capacity | 223 liters |
| Noise Level | 42 dB |
| Height | 1860 mm |
To Next Page
