Need help?Do you have a question about the zapco Reference 350.2 and is the answer not in the manual?
Variable crossover, input switching, bass EQ, and SymbiLink™ balanced inputs.
Converts signals to balanced, ensuring immunity to interference and reducing distortion.
Achieved through SymbiLink™ and high-quality, low-noise components.
Fuse/breaker placement and proper wire routing to prevent hazards.
Caution against excessive sound levels causing permanent hearing loss.
Avoid common connections between speaker wires to prevent amplifier damage.
Proper wire gauge is critical for delivering sufficient current to the amplifier.
Crucial for maximizing musical output while minimizing noise and distortion.
Step-by-step guide to setting amplifier gains for optimal clean sound.
Diagram and explanation of front panel connectors and controls.
Guidance for connecting speakers and power supply, including fuse recommendation.
Explanation of input types, gain adjustment, bass boost, and crossover controls.
Details on speaker connections and input signal mode selection.
Guidance on 12V power connector and recommended fuse rating.
Diagram and explanation of front panel controls and connections.
Details on setting front crossover mode and frequency for various setups.
Details on setting rear crossover mode and frequency.
Explanation of input selection modes for separate or combined signal routing.
Explanation of front panel controls and inputs for the 1000.4 amplifier.
Explanation of rear panel controls and inputs for the 1000.4 amplifier.
Detailed specifications for the 650.6 amplifier.
Explanation of front channel inputs, gain, source select, and crossover.
Explanation of rear channel inputs, gain, source select, and crossover.
Explanation of subwoofer channel controls: gain, signal source, bass boost, crossover.
Source Select and crossover for channels 1/2, including band pass setup.
Controls for channels 3/4, noting differences in mode switch bridging.
Controls for bass channels 5/6, including Source Select and Bass EQ.
Phone, FAX, and website for ZAPCO technical support and inquiries.
Procedure for product returns for repair, including RMA number requirement.
To Next Page
General