Need help?Do you have a question about the zapco Reference 500.1 and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| THD at Rated Power | < 0.05% |
| Damping Factor | > 200 |
| Subsonic Filter | 10Hz - 50Hz |
| RMS Power at 4 Ohms | 500W |
| Power Output | 500 Watts |
| Frequency Response | 10Hz |
| Crossover Range | 250 Hz |
| Dimensions | 2.25" |
To Next Page