Need help?Do you have a question about the zapco Reference 650.6 and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| RMS Power at 4 Ohms | 65W x 6 |
| RMS Power at 2 Ohms | 100W x 6 |
| RMS Power Bridged at 4 Ohms | 200W x 3 |
| THD at Rated Power | <0.05% |
| S/N Ratio | >100 dB |
| Damping Factor | >200 |
| Input Sensitivity | 200 mV - 6 V |
| Crossover Slope | 12 dB/octave |
| Frequency Response | 10 Hz - 30 kHz |
ZAPCO's dedication to audio fidelity and its extensive experience in the car audio industry.
Explains the design approach, key features, and value proposition of the Reference Series amplifiers.
Details high-quality components, SymbiLink™ technology, and advanced audio design principles.
Discusses critical performance metrics like Damping Factor, Slew Rate, and Signal to Noise Ratio.
Crucial safety warnings, wire size recommendations, and best practices for amplifier installation.
Covers input options, gain setting, signal mode, bass EQ, and crossover controls for optimal setup.
Specifications, power curve, and front panel layout for the Reference 200.2 amplifier.
Specifications, power curve, and front panel layout for the Reference 350.2 amplifier.
Specifications, power curve, and front panel layout for the Reference 750.2 amplifier.
Overview of ZAPCO's mono amplifier lineup, including the 500.1 and 1100.1 models.
Covers specifications, layouts, and key features for the Reference 500.1 and 1100.1 models.
Overview of ZAPCO's multi-channel amplifier lineup, including 360.4, 1000.4, and 650.6.
Covers specifications, layouts, and features for the 360.4, 1000.4, and 650.6 models.
Wiring diagrams for various system configurations and amplifier hookups.
Contact information for factory service, warranty, and troubleshooting.
To Next Page