Need help?Do you have a question about the zapco Z-series and is the answer not in the manual?
States Zapco's dedication to audio fidelity, quality products, support, and business ethics.
Highlights Zapco's 40-year leadership in car audio and use of innovative technologies.
Explains the Z-Series development based on experience and human perception studies.
Provides a table correlating amperage and wire gauge for different lengths.
Details the Class-AB bridgeable 12V amplifier's capabilities and circuitry.
Outlines the Class-AB bridgeable 12V amplifier's features and protection circuitry.
Describes the Class-AB bridgeable amplifier's channel configurations and features.
Encompasses the Class-AB bridgeable amplifier's multi-channel capabilities and features.
Shows RCA wiring for the Z-150.2 model, including input and output usage.
Demonstrates RCA connections for the Z-400.2 model, detailing input/output and remote turn-on.
Depicts RCA wiring for the Z-150.4 amplifier across different channel modes.
Explains RCA connections for the Z-150.6 amplifier, covering multiple channel configurations.
Illustrates power and ground wiring for the Z-150.2 model, including remote turn-on.
Shows power and ground connections for Z-400.2/Z-150.4, with a caution on fuse installation.
Explains +12V power, ground, and remote connections for the Z-150.6 model.
Illustrates speaker wiring for 1, 2, and 3 channel modes of the Z-150.2.
Details speaker wiring for 1, 2, and 3 channel modes of the Z-400.2.
Shows speaker wiring for 2, 4, and 6 channel modes of the Z-150.4.
Details speaker wiring for 3, 2, and 5 channel modes of the Z-150.6.
Shows speaker wiring for the 6 Channel Mode of the Z-150.6 amplifier.
Lists rated power output, signal-to-noise ratio, crossovers, frequency response, and dimensions.
Details rated power output, noise ratio, crossovers, frequency response, and dimensions.
Encompasses rated power output, signal-to-noise, crossovers, frequency response, and dimensions.
Outlines rated power, noise ratio, crossovers, frequency response, and dimensions for the 6-channel model.
Troubleshooting steps for when the amplifier does not receive power.
Guidance for issues when the amplifier's protection indicator is active.
Checks for cause of blown fuses, including impedance and short circuits.
Diagnosing and resolving amplifier overheating problems.
Steps to address issues with low volume or distorted audio output.
Troubleshooting common causes of hissing and engine noise in speakers.
To Next Page
General