zapco Z-series - Amplifier Features; Z-150.4 Features; Z-150.6 Features

Class-AB bridgeable car amplifier
4/3/2 channel bridgeable car amplifier
Stable into 4 ohms bridged or 2 ohms stereo load
PWM MOSFET power supply
Variable input sensitivity
18dB octave crossover slope
Variable Full / LP / HP Crossover
Variable bass boost
RCA signal input and output connectors
4-way protection circuitry
(thermal / over current / speaker short / DC)
Tested voltage & THD: 14.4V & less than 0.05% THD at rated power
Operating voltage : DC10V~15.5V power input
Wired remote control (optional)
-6-
Z-150.4
Class-AB bridgeable car amplifier
7/6/5/3 channel bridgeable car amplifier
Stable into 4 ohms bridged or 2 ohms stereo load
PWM MOSFET power supply
Input sensitivity (gain) control variable
18dB octave crossover slope
Variable Full/LP/HP selectable crossover
(CH1/2/3/4)
Variable Full/LPF Selectable crossover (CH5/6)
Variable bass boost (CH5/6)
Variable subsonic (CH5/6)
RCA signal input connectors
4-way protection circuitry
(thermal / over current / speaker short / DC )
Tested voltage & THD: 14.4V & less than 0.05% THD at rated power
Operating voltage : DC10V~15.5V power input
Wired remote control (optional)
Z-150.6
FEATURES