zapco Z-series - Amplifier Features; Z-150.2 Features; Z-400.2 Features

Class-AB bridgeable 12V amplifier
2/1 channel bridgeable 12V amplifier
Stable into 4 ohms bridged or 2 ohms stereo load
PWM MOSFET power supply
Variable input sensitivity
18dB octave crossover slope
Variable FULL / LP / HP Electronic Crossover
0dB, 6dB, 12dB selectable bass boost
RCA Signal input and output connectors
4-way protection circuitry
(thermal / over current / speaker short / DC)
Tested voltage & THD: 14.4V & less than 0.05% THD at rated power
Operating voltage : DC10V~15.5V power input
Wired remote control (optional)
-5-
Z-150.2
Class-AB bridgeable 12V amplifier
2/1 channel bridgeable 12V amplifier
Stable into 4 ohms bridged or 2 ohms stereo load
PWM MOSFET power supply
Variable input sensitivity
18dB octave crossover slope
Variable FULL / LP / HP crossover
Variable bass boost
Signal input and output RCA connectors
Multi-way protection circuitry
(thermal / over current / speaker short / speaker DC protection)
Tested voltage & THD: 14.4V & less than 0.05% THD at rated power
Operating voltage : DC10V~15.5V power input
Wired remote control (optional)
Z-400.2
FEATURES