Need help?Do you have a question about the zapco Z600C2-SL SymbiLink and is the answer not in the manual?
Guidance for proper operation and maximum performance during amplifier installation.
Recommendations for selecting a dry location and securely fastening the unit for optimal heat dissipation.
Information on the optional Remote Status Display unit for monitoring amplifier status.
General| Channels | 2 |
|---|---|
| Power Output | 600 Watts |
| RMS Power @ 4 Ohms | 150 Watts x 2 |
| RMS Power @ 2 Ohms | 300 Watts x 2 |
| RMS Power @ 4 Ohms Bridged | 600 Watts x 1 |
| THD | <0.05% |
| Damping Factor | > 200 |
| Frequency Response | 10 Hz - 30 kHz |
| Crossover Slope | 12 dB/octave |
| Input Voltage | 12V |
| Crossover | Variable |
| Dimensions | 9.5" x 2.5" |
To Next Page