zapco Z600C2-SL SymbiLink User Manual

6
Specifications
Power per channel - 2 channel mode THD
150 watts x 2 @ 4Ω, 20 - 20kHz
< .01%
325 watts x 2 @ 2Ω
< .02%
450 watts x 2 @ 1Ω
< .05%
Power - Bridged Mono
325 watts x 1 @ 4Ω
< .02%
900 watts x 1 @ 2Ω
< .05%
Frequency Response
2 Hz - 150 kHz
S/N Ratio
> 100 dB
Transient Distortion
< .002%
Slew Rate
> 75 v/µS
Separation @ 1 kHz, “A” weighted
> 80 dB
Damping Factor
> 1000 @ 4Ω
Input Sensitivity (in three ranges)
.25 - 12.5 volts
Max. Current Requirements
130 amperes @ 800 watts
Idle Current
2.5 amperes
Dimensions
2.5” x 8” x 19.375”

zapco Z600C2-SL SymbiLink Specifications

General

Brand	zapco
Model	Z600C2-SL SymbiLink
Category	Amplifier
Language	English