Zebra 105 SL User Manual

2 Zebra 105SL User’s Guide
8QSDFNLQJDQG,QVSHFWLRQ
Carefully unpack and inspect the printer for damage:
• Check all exterior surfaces.
• Raise the media access door and inspect the media compartment.
Save the carton and all packing material in case the printer needs to be
shipped. Contact your authorized Zebra reseller for instructions.
5HSRUWLQJ'DPDJH
If you discover shipping damage:
• Immediately notify the shipping company and file a report with them.
Zebra Technologies Corporation is not responsible for any damage
incurred during shipment of the equipment and will not repair this
damage under warranty.
• Keep the carton and all packing material for inspection.
• Notify your authorized Zebra reseller.
6WRUDJH
If you are not placing the printer into operation immediately, repackage it
using the original packing materials. The printer may be stored under the
following conditions:
• Temperature: –40° to +140° F (–40° to +60° C)
• Relative humidity: 5% to 85% non-condensing

Zebra 105 SL Specifications

General

Brand	Zebra
Model	105 SL
Category	Label Maker
Language	English