Zebra Omni-ID Custom ZT410

!!
"#$$$%&'($)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!$'*$%+!
!
Omni%ID(Custom(ZT410(Guide!
(((
(
(
(
!
!
!
!
!
!
(
(
#,-.(/"!011.23!40 2 56 .0- 7 8!9 : !;!9<!;!=>.- 5!; !/- ? .5 !;!@3A,5-B!!
! !

Zebra Omni-ID Custom ZT410 Specifications

General

Print Resolution	203 dpi (8 dots/mm), 300 dpi (12 dots/mm) optional
Print Speed	14 ips (356 mm per second)
Maximum Print Width	4.09 in./104 mm
Connectivity	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Media Width	0.79 in./20 mm to 4.5 in./114 mm
Media Thickness	0.0025 in to 0.01 in (0.06 mm to 0.25 mm)
Operating Temperature	40°F to 104°F (5°C to 40°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)

Summary

Printer Setup Guide

Loading Label Spool

Instructions for loading the label spool and securing it with the media supply guide arm.

Media Guide Adjustment

Guidance on sliding the media guide to touch the edge of the media release liner.

Media Gap Sensor Positioning

Locating the media gap sensor to detect the start of the RFID label.

Feeding Labels Through Print Head

Instructions for feeding labels under the print head and adjusting head pressure.

Ribbon Usage and Loading

Recommended Ribbon Type

Omni-ID recommends using a high-quality Resin ribbon, such as ITW B324.

Loading Ribbon Rolls

Instructions on how to load ribbon rolls with the ink side facing the print receptive layer.

Printer Settings Configuration

General Printer Setup

Setup printer settings using the main control panel for optimal print quality.

RFID Encoding Settings

Optimize RFID encoding settings for Omni-ID labels, including calibration.

Media and Ribbon Calibration

Calibrate media and ribbon for each media type to ensure correct printing.

Print Troubleshooting Guide

Label Feed and Alignment Issues

Solutions for labels not feeding or barcodes not being straight.

Print Quality Problems

Troubleshooting for no print, partial print, print blurring, or print too light.

Tag Spacing Errors

Resolving issues where the printer misses tags between printed tags.

Software Setup for Printing

Recommended Software

Recommends NiceLabel Pro or Bartender software for the Custom Zebra ZT410 printer.

Software User Guides

Provides links to user guides for detailed software instructions.