Need help?Do you have a question about the Zebra ZP 505 and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Max Print Width | 4.09 inches |
| Max Print Length | 39 inches |
| Max Print Speed | 5 inches per second |
| Media Sensors | Reflective and Transmissive |
| Connectivity | USB |
| Memory | 8 MB Flash, 8 MB SDRAM |
| Media Width | 1.00 to 4.25 inches |
| Media Length | 39 inches (991 mm) |
| Programming Language | ZPL II |
| Supported Media Types | Continuous, Black Mark |
| Power Requirements | 100-240V AC, 50-60Hz |
Procedure to remove previous Zebra printer drivers for a clean installation.
Install the ZP 505 thermal printer driver using the plug and play method.
Configure the printer for use with FedEx Ship Manager at fedex.com.
Configure the printer for use with the installed FedEx Ship Manager Software.
To Next Page
