Zebra TLP

ZEBRA TLP LABEL PRINTER SETUP GUIDE – VISTA
1. Have PC turned on, ensuring no programs
are running.
2. Plug power into ZEBRA TLP and turn on
by holding the round green button.
3. Plug USB lead into available USB port.
4. Vista will detect the device and prompt
for further action (left)
5. Select “ Don’t show this message again
for this device”
6. Now you will be looking at a clear
desktop. Click Start, then control panel.
7. Now in control panel, click Printers

Zebra TLP Specifications

General

Brand	Zebra
Model	TLP
Category	Label Maker
Language	English

Summary

Initial Printer Connection and Navigation

Connecting Hardware and Initial Detection

Connect the printer, power it on, plug into USB, and allow Windows to detect the device.

Accessing Printer Settings via Control Panel

Navigate from the desktop to the Control Panel and then select the Printers option.

Adding a Local Printer and Port Selection

Initiating the Add Printer Wizard

Start the wizard by selecting "Add a printer" and then "Add a local printer".

Selecting the Correct Printer Port

Choose to use an existing port and select the virtual printer port for USB.

Driver Installation and Printer Configuration

Selecting Generic Driver Components

Select "Generic" as the manufacturer and "Generic/Plain Text" as the printer model.

Naming the Printer and Finalizing Setup

Name the printer 'ZebraTLP', set it as non-default, and complete installation.