108 Zebra 105SL User’s Guide
RS-232 Interconnections Using a DB25 Cable
In order to connect the printer’s RS-232 DB9 interface to a DB25
connector, an interface adapter is required (Zebra part # 33138). A generic
DB25 adapter may also be used, however the +5VDC signal source would
not be passed through. Figure 45 illustrates the connections required for
the DB9 to DB25 interface.
NOTE: The cable used to connect the printer to a computer must
be a null modem (crossover) cable. If you want to connect the
printer to any other DTE devices, you must also use a null modem
cable.
Figure 45
To Next Page
Loading...