Zebra 105 SL - Page 22

14 Zebra 105SL User’s Guide
2SHUDWRU&RQWUROV
32:(56ZLWFK
The POWER switch is located at the back of the printer above the power
cord connector. Turn on the printer.
)URQW3DQHO
The step-by-step instructions in this section
tell you which keys to press and what
appears on the liquid crystal display (LCD)
during the calibration procedure.
For a more detailed explanation of the front
panel keys and lights (shown in Figure 9),
refer to the instructions that begin on
page 26.
Figure 9