Zebra 105 SL - Page 42

34 Zebra 105SL User’s Guide
&XWWHU0RGH
(Cutter option required)
Refer to Figure 19.
1. Open the printhead.
2. Slide the media guide and media supply guide as far from the printer
frame as possible.
3. Load media as shown.
4. Slide in the media guide and media supply guide so they just touch,
but don’t restrict, the edge of the roll.
5. Close the printhead.
6. The printer automatically feeds out and cuts one label when the printer
is turned on.
Figure 19