Zebra 105 SL - Page 83

Zebra 105SL User’s Guide 75
)XVH5HSODFHPHQW
The printer uses a metric-style fuse (5 x 20 mm IEC) rated at F5A, 250V.
The end caps of the fuse must bear the certification mark of a known
international safety organization (see Figure 37 on page 97).
Depending on the model you have, the fuse may not be user-replaceable
(see Figure 30) and may need to be replaced by a qualified service
technician. Please see the maintenance manual (part # 32056L) for details.
NOTE: Models with a user-replaceable fuse have a warning label
next to the fuse for easy identification.
Figure 30