30
RW Series User Guide
dio module can be identified by the FCC ID number
“I28MD-RW4137” and other regulatory information on the
serial number label on the back of the unit.
• RW series printers with a Zebra Value Radio, 802.11b can
be identified by the FCC ID number “I28MD-ZLAN11B”
and other regulatory information on the serial number la-
bel on the back of the unit.
• RW series Wireless Network Printers with the
Zebra 802.11b/g WLAN radio module can be iden-
tified by the text “Wireless Network Printer” and
FCC ID: I28MD-ZLAN11G on the serial number label on
the back of the printer.
• RW 420 printers with both an 802.11b WLAN radio and a
Bluetooth radio running in the same unit are considered
to be dual radio devices. At present only one dual radio
configuration is offered, for RW 420 only, with Bluetooth
radio FCC ID “I28MD-BTC2TY3” and 802.11b Compact
flash radio FCC ID “I28MD-RW4137”. The FCC ID num
-
bers and other regulatory information for both radios
are located on the serial number label on the back of the
RW 420.
Printers so equipped allow wireless communication as a
node within a WLAN and its wireless capabilities allow com-
munications from any point within the WLAN’s perimeter.
Printers equipped with the dual Bluetooth/802.11b WLAN
radio configuration can be linked to both a WLAN and a
Bluetooth network simultaneously.
Methods of establishing communications to RW series print-
ers will vary with each LAN application. General informa-
tion on establishing WLAN communications can be found
in either the ”CPCL Programmers Manual” or the “Quick
Start Guide for Mobile Wireless Printers” both available at
www.zebra.com. More information and LAN configuration
utilities may also be found in Zebra’s Label Vista™ program
(version 2.8 and later). Label Vista may be downloaded from
Zebra’s Web site at www.zebra.com.
Setting Up the Software
RW series printers use Zebra’s CPCL Programming language
which was designed for mobile printing applications. CPCL is
To Next Page
Loading...
Need help?
General
