Zebra RW SERIES - Adjustable Shoulder Strap

45
RW Series User Guide
Figure 20: Using the Shoulder Strap
Adjustable Shoulder Strap
Refer to Figure 20. If your printer is equipped for the shoul-
der strap option: snap each end of the shoulder strap into the
“D” rings in the top of the printer. Slide the buckle away from
or towards the printer until you achieve the desired length.
Hold
Buckle
Pull Strap
here to
lengthen
Pull Strap
here to
shorten
Snap in to
“D” rings
on printer