TC21/TC26 Quick Start Guide
14
Setting Up the Device
To start using the device for the first time.
1. Install a micro secure digital (SD) card (optional).
2. Installing a nano SIM card (optional)
3. Install hand strap (optional).
4. Install the battery.
5. Charge the device.
6. Power on the device.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD pre-
cautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
15 Battery Standard - 3,400 mAh (typical) / 3,100 mAh (minimum)
PowerPrecision Lithium-ion Battery
Extended - 5,260 mAh (typical) / 5,000 mAh (minimum),
PowerPrecision Lithium-ion Battery.
16 Volume Up/Down Button Increase and decrease audio volume (programmable).
17 Scan Button Initiates data capture (programmable).
18 Camera Flash Provides illumination for the camera.
19 Rear Camera Takes photos and videos.
20 Power Button Turns the display on and off. Press and hold to reset the device or
power off.
21 Exit Window Provides data capture using the imager.
22 Microphone Use for communications in Speakerphone mode.
Table 2 Back View Features (continued)
Number Item Function