53
Setup for Windows OS
Configure Using the Connectivity Wizard
1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
4. From the Choose Port list, select the port to which your printer is connected.
• If you will save the file without sending it to the printer, you may select any available port.
• If you select File:, you will be asked to browse to the location of the file you want to save.
• If you select a serial port, the serial configuration information appears below the ‘Choose
Port’ list. If necessary, change the serial communication settings to match your printer’s
settings.
5. Click Next.
The wizard prompts for the print server device to configure.
Note • If a port is in use by another device, it will not be included in the drop-down list.
To Next Page
Loading...
