70
Setup for Windows OS
After Your Printer is Connected
1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
Test Print with a Copied ZPL Command File for Non-Windows Operating Systems:
1. Create a text file with the following ASCII three characters: ~WC
2. Save the file as: TEST.ZPL (an arbitrary file name and extension name).
3. Copy the file to the printer. For DOS, a file sent to a printer connected to the system’s serial port
would be as simple as:
COPY TEST.ZPL COM1
Other interface connection types and operating systems will have different command strings. See
your operating system documentation for detailed instructions to copy to the appropriate printer
interface for this test.
To Next Page
Loading...
