1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
5
Print Operations
This section provides media and print handling, font and language support, and the setup of less
common printer configurations.
Thermal Printing
Determining Your Printer’s Configuration Settings
The ZD420 printer uses the configuration report to provide the printer settings. Operational status
(darkness, speed, media type, etc.), installed printer options (network, interface settings, cutter,
etc.) and printer description information (serial number, model name, firmware version, etc.) are
all included on the configuration report.
See Test Printing with the Configuration Report on page 41 to print this label.
See Managing the ZPL Printer Configuration on page 145 to help interpret the configuration
report and the associated programming command and command states it is identifying in the
report.
Caution • The printhead becomes hot while printing. To protect from damaging the
printhead and risk of personal injury, avoid touching the printhead. Only use the cleaning
pen to perform printhead maintenance.
Caution • The discharge of electrostatic energy that accumulates on the surface of the
human body or other surfaces can damage or destroy the printhead or electronic
components used in this device. You must observe static-safe procedures when working
with the printhead or the electronic components under the top cover.
To Next Page
Loading...
