Specifications at a Glance*
www.zebra.com
Other Locations
USA: California, Georgia, Rhode Island, Texas, Wisconsin Europe: France, Germany, Italy, Netherlands, Poland, Spain, Sweden Asia Pacific:
Australia, China, India, Japan, South Korea Latin America: Argentina, Brazil, Florida (USA), Mexico Africa/Middle East: Russia, South Africa,
United Arab Emirates
Corporate Headquarters
+1 800 423 0442
inquiry4@zebra.com
Asia-Pacific Headquarters
+65 6858 0722
apacchannelmarketing@ zebra.com
EMEA Headquarters
+44 (0)1628 556000
mseurope@zebra.com
Latin America Headquarters
+1 847 955 2283
inquiry4@zebra.com
GSA#: GS-35F-0268N
P1031036 (8/10)
Standard Features
• Print method: Direct thermal
• Head-up sensor
• Peel dispenser
• Integrated power supply
• Dynamic media calibration
• Rear feed slot
• USB interface
• Serial interface
• Centronics
®
parallel interface
Printer Specifications
Resolution
203 dpi (8 dots/mm)
Memory
Standard: 8 MB RAM, 2 MB Flash
Print Width
4.09" (104 mm) maximum
Print Length
39"/991 mm maximum
Print Speed
5"/127 mm per second
Media Sensors
Transmissive and reflective sensors
Media Characteristics
Label and Liner Width
0.75"/19 mm to 4.25"/108 mm
Label and Liner Length
0.375"/9.5 mm to 39"/991 mm
Maximum Roll Size
5"/127 mm outside diameter
Core Size
1"/25.4 mm to 1.57"/40 mm inside diameter
Media Thickness
0.003"/0.076 mm to 0.0075"/0.191 mm
Media Types
Roll-fed or fanfold; die-cut or continuous; direct
thermal labels with gap or black mark
Ribbon Characteristics
Outside diameter
3.2"/81.3 mm
Standard length
984'/300 m or 1476'/450 m
Ratio
• 2:1 media roll to ribbon ratio for 984'/300 m
• 3:1 media roll ribbon ratio for 1476'/450 m
Width
1.57"/40 mm to 4.33"/110 mm
Ribbon setup
Ribbon wound ink-side out
Core I.D.
1.0"/25.4 mm
Operating Characteristics
Environmental
• Operating temp: 40º F/5º C to 105º F/41º C
• Storage temp: -40º F/-40º C to 140º F/60º C
• Operating humidity: 10-90% non-condensing R.H.
• Storage humidity: 5-95% non-condensing R.H.
Electrical
• Auto-ranging internal supply; input: 100-240 VAC,
50-60 Hz
Agency Approvals
UL, c-UL, FCC, CE, VCCI, C-Tick, CCC, NOM, IRAM,
GOST-R, COC-Safety Mark, UC-IEE
Physical Characteristics
• Width: 7.12"/181 mm
• Height: 7.5"/191 mm
• Depth: 8.5"/216 mm
• Weight: 4.6 lbs./2.1 kg
Zebralink™ Solutions
Software
• Zebra ZP 505 Windows Driver
• Supported on: Windows 95, ME, 98, NT, 2000, XP,
Server 2003
Networking Options
• Serial RS-232 (DB9)
• USB v1.1
• Centronics parallel (36 pin)
Firmware
• ZPL II
®
—Universal language for Zebra printers
simplifies label formatting.
• Webview
• Alert
• ZBI 2.0™
Fonts and Graphics
Fonts and Character Sets
16 bitmapped, 1 smooth scalable (CG Triumvirate™
Bold Condensed), IBM® Code Pages 850, 1250, and
1252 international character sets
Graphic Features
Support user-defined fonts and graphics, including
custom logos; ZPL II drawing commands, including
boxes and lines
Bar Code Symbologies
Linear Bar Codes
Codabar, Code 11, Code 93, Code 39, Code 128,
EAN-8, EAN-13, Industrial 2-of-5, Interleaved 2-of-5,
Logmars, MSI, Planet Code, Plessey, Postnet, Standard
2-of-5, UPC and EAN 2 or 5 digit extensions, UPC-A,
UPC-E, RSS-14
2-Dimensional
Codablock, Code 49, Data Matrix, MaxiCode, QR Code,
PDF417, MicroPDF417, TLC 39
RoHS Compliant
This product meets the requirements
of the Restrictions of Hazardous Waste
Directive of the European Union.
*Specifications subject to change without notice.
©2010 ZIH Corp. ZebraLink and all product names and numbers are
Zebra trademarks, and Zebra, and ZPL are registered trademarks of
ZIH Corp. All rights reserved. FedEx and FedEx Ship Manager are
registered trademarks of FedEx Corporation. Windows is a registered
trademark of Microsoft Corporation. CG Triumvirate is a trademark of
Monotype Imaging, Inc. and may be registered in certain jurisdictions.
IBM is a registered trademark of International Business Machines
Corporation. Centronics is a registered trademark of Centronics Data
Computer Corporation. All other trademarks are the property of their
respective owners.