Zebra ZQ320 - QR Code Functionality; Made for iPhone (MFi) Compatibility

P1096702-001 • Introduction • -1-11 •
Zebra Setup Utilities is a Windows™ based one-stop installation and setup software
tool, which also offers diagnostic and utility routines. Setup Utilities also allows the
user to easily congure network and/or Bluetooth connectivity settings, congure print
quality, and download fonts and graphics.
Equipment Required For Zebra Setup Utilities
1. A PC with the following minimum system requirements:
• 32-bit or 64-bit version of the following:
Windows XP
Windows 2003
Windows 2008
Windows Vista
Windows 7
Windows 8
• VGA monitor or better
• Hard Drive with at least 25 MB free disk space
• A Communication Port (serial, parallel, USB, or Ethernet)
Starting Zebra Setup Utilities
1. Plug the USB cable into a USB port on your PC
2. Plug the other end of the interface cable into the printer’s USB port.
3. Start the Setup Utilities program by either clicking on the Setup Utilities shortcut on
your desk top, or using the “Start” button.
4. Follow the System Prepare Wizard to identify a printer driver port and to access the
Setup Utilities interface to use its many design, editing and diagnostic features.
Introduction to Zebra SetupUtilities