25
ZQ500 Series User Guide
Icons for Power Save Mode and Draft Mode are also dis-
played on the control panel in place of the Media Out Icon. When
the printer is in Power Save Mode and is not in a media out con-
dition, the Power Save icon shall display. When the printer is in
Power Save Mode and also in a media out condition, the Media
Out icon will be displayed instead of the Power Save icon. This is
due to the fact that the printer is not running when there is a media
out condition. If the printer is in both Power Save Mode and Draft
Mode, the Power Save icon will be displayed.
When the printer is in Draft Mode due to a user setting, the Draft
Mode icon will be displayed. However, when the printer is in Draft
Mode and in a media out condition, the blinking Media Out icon
will be displayed.
Buttons
The User has the ability to use the three button interface on the
ZQ510 and ZQ520 with the following Power Up and Run Time se-
quences.
Power Up Sequences
Sequence
#
Function Keys Button
1 Two Key Report Hold down Feed button
while pressing the Power
button
2 Con g Label then
Network Label
Hold down Select button
while pressing the Power
button
3 Forced Download Hold down the Select and
Feed buttons while pressing
the Power button
4 Causes the unit to
turn on or o or to
enter Sleep Mode
Power Button
To Next Page
Loading...