Zebra ZQ510 - LED Indicators and Alerts; LEDs; Alerts

26
ZQ500 Series User Guide
Run Time Sequences without LED Flashes
Sequence # Function Keys Button
1 Two-key and ZPL
Con g
Hold down Feed
button and Select
button for 3 seconds
2 Repeated Feed
Events
Feed button
3 Wake (if in Sleep
Mode)
Power button or
Select button
LED’s
The ZQ500 Series printers feature a tri-colored LED ring locat-
ed around the Power button which shows the state of the battery
during charging processes (as shown below).
Power On/Charged Battery
Power On/Battery Eliminator Plugged In
Battery Charging (Yellow LED Ring)
Sleep Mode (Blinking Green LED Ring)
Battery Fault (Red LED Ring)
Alerts
The control panel has the ability to display various alerts to the
user in the form of Acknowledged Alerts, Non-Acknowledged
Alerts, and Error Alerts.
An Acknowledged Alert displays over the printer status icons
and requires user input to be cleared, i.e. press the Select button
to clear such an alert.
(( ))
BATTERY LOW
LED showing
battery fault
Acknowledged
Alert