33
ZQ500 Series User Guide
Figure 12: Bluetooth Minimum Security Modes
BT Version of Master Device (>2.1)
bluetooth.minimum_security_mode=1
Secure Simple Pairing
Just Works/Numeric Comparison
bluetooth.minimum_security_mode=2
Secure Simple Pairing
Just Works/Numeric Comparison
bluetooth.minimum_security_mode=3
Secure Simple Pairing
Numeric Comparison
bluetooth.minimum_security_mode=4
Secure Simple Pairing
Numeric Comparison
bluetooth.bluetooth_PIN
Not Used
bluetooth.minimum _ security _ mode sets the lowest security
level at which the printer will establish a Bluetooth connection. The
printer will always connect at a higher security level if requested by the
master device.
The ZQ500 Series printers also feature bonding for Bluetooth.
The printer caches pairing info so devices stay paired through
power cycles and disconnects. This eliminates the need to re-
pair on every connection establishment.
The bluetooth.bonding SGD is on by default.
Note • For detailed information on Bluetooth, please refer to the
Bluetooth Wireless User Guide (P1068791-001) at:
http://www.zebra.com/us/en/support-downloads.html
In addition, the ZQ500 Series printers support Near Field
Communication (NFC) technology. Using the “Print Touch” fea-
ture located on the side of the printer, end-users can automati-
cally connect via Bluetooth from a handheld device that supports
NFC technology. The NFC tag has the printer’s BDADDR encod-
ed in a URL on the tag. Simply touching the NFC handheld device
to the “Print Touch” icon on the printer will connect and pair the
handheld device to the printer.
To Next Page
Loading...